The Lotus Grand Tourers

Got it moving. Guess it's the first time it's been adjusted since 1988. Used this to grip the knurled end by holding it at an angle, not ideal - a bit brutal but it worked and didn't mess up the knurled bit :roll: Once the 7mm screw was moving it was quite easy to adjust. https://onedrive.live.com/e...

OK thanks Pete
I'm a bit nervous of shearing the end off as it's very tight. As you say 8mm is too small and 9mm too big plus it's recessed so you need an off set ring spanner anyway. This should be a simple thing to do I will have another go

So removed the instrument cluster this morning and was pleasantly surprised to see access to the brake pedal clevis pin was excellent. Not something you can usually say about anything to do with the pedal box. Clevis pin and adjusting nut arrowed. https://onedrive.live.com/embed?resid=c879f1a1772c75...

Thanks for the very useful replies chaps. Will let you know how I get on. Perhaps take a few pictures and this could be a 'how to' for future owners.

May have found the answer by searching

viewtopic.php?f=7&t=8360&p=61946&hilit= ... ent#p61946

I have a fair bit of 'slack' in my brake pedal movement. i.e. You have to move the pedal a distance before it engages with the master cylinder. With the instrument cluster removed, I can see the 'push rod' that passes through the bulkhead moves as soon I move the brake pedal - no slack at the pedal ...

Great pictures. A lot more modified cars than you see at UK car shows. That MGB looked nice. Certainly better than it left the factory!

Looks fantastic! Really nice job. Mine is waiting to be done again. Last time 2009

These are still available and cheap

https://www.autoelectricalspares.co.uk/ ... 2673-p.asp

My car is an 1988 and the alternator looks the same as yours. Mines a Valeo

Might find something in this thread useful viewtopic.php?f=27&t=11059&p=84889&hili ... tor#p84889

wrxseeker wrote: ↑

Thu Oct 19, 2023 10:07

Hi Phil - put me down for one to collect at the NEC please. Not sure if there is an “orders” thread yet !

Thanks

Darren

Hi Darren - Richard and the team on the stand will be selling them. I think Richard will be taking orders soon.

Just in case some of you don't frequent the 'Off Topic' section - here is a link to the 2024 calendar thread viewtopic.php?f=12&t=12552
Go to the end of the thread for instructions on voting for your favourite pictures. The most popular 13 will be used in the calendar.

Link here https://www.youtube.com/@neildonaldsonl ... sto/videos

Here's a wrapped car - think the owner did it himself. Was good but some of the edges on the bonnet air intakes weren't great. https://onedrive.live.com/embed?resid=c879f1a1772c751b%2112872&authkey=%21AOgKnNi0s7k-7NI&width=4896&height=3672 https://onedrive.live.com/embed?resid=c879f1a1772c751b%21128...

Looking at page 23 of Absolute Lotus Magazine I see the new Excel 1:18 scale can be pre ordered from Cult Models. Cost around £193