Page 1 of 1

Excel indicator stalk 1984

Posted: Wed Feb 07, 2024 16:04
by jpm6591
Has anyone dismantled one of these?
https://www.johnrichardssurplus.co.uk/l ... 33768.html
Mine is relatively new, only a few years old and 240miles use. However the stalk will not stay in position in either Left or right positions. Works if I hold it in position. Bit wary of talking apart as I ventured down that path with wiper switch and watched as a small spring took off down the road, never to be seen again :-(

TIA Jim

Re: Excel indicator stalk 1984

Posted: Wed Feb 07, 2024 19:44
by Alan_M
Are you sure the ring with the protrusion that cancels the indicators as you turn the wheel is correctly position and not sliding/jammed?

Re: Excel indicator stalk 1984

Posted: Wed Feb 07, 2024 20:07
by Pete Boole
Alan_M wrote:
Wed Feb 07, 2024 19:44
Are you sure the ring with the protrusion that cancels the indicators as you turn the wheel is correctly position and not sliding/jammed?
That's what I was going to say!

Pete

Re: Excel indicator stalk 1984

Posted: Thu Feb 08, 2024 09:53
by jpm6591
Ok,
Will check that. RH seems to hold, LH nothing at all.
Both were working fine last time I drove her.

Thanks

Jim

Re: Excel indicator stalk 1984

Posted: Wed Feb 14, 2024 09:39
by jpm6591
It is the stalk, as I removed it and only the RH side holds about 60% of the time. LH doesn't click in at all.
Can it be opened for fault finding?

TIA

Jim