Hi
I just noticed the chrome is peeling off my headlight unit reflectors so it would be a good idea to replace them. Does anybody know if the original units are still available (at a sensible price) or can recommend an alternative?
Thanks
Carl
Headlight units
Moderator: Board Moderators
-
- Regular Poster
- Posts: 113
- Joined: Sat Nov 04, 2017 13:01
- Model: Excel SE
- Colour: Red
- Year: 1987
- Location: Cambridgeshire
- Contact:
Headlight units
Carl
87 Excel SE
72 Elan Sprint
97 Alpina B10
87 Excel SE
72 Elan Sprint
97 Alpina B10
-
- Senior Poster
- Posts: 2196
- Joined: Tue Nov 01, 2005 20:01
- Model: SE x2 + Celebration x2
- Colour: Gold,blue and green
- Year: 1987
- Location: Norwich
Re: Headlight units
The originals aren't, and I don't know of a reasonable way to refurbish them but there are several posts about swapping out to standard 7 inch bowls and reflectors.
- Hawaiis0
- Senior Poster
- Posts: 4145
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Headlight units
https://www.ebay.co.uk/itm/1pcs-7-inch- ... 2749.l2649Hawaiis0 wrote:Update on the night vision with the new LED headlights.
Main first then dipped
Nothing is fool proof. Fools are clever!
-
- Junior Poster
- Posts: 69
- Joined: Wed Feb 01, 2017 10:17
- Model: se
- Colour: red
- Year: 1991
- Location: manchester
Re: Headlight units
There are a couple of places that do headlight bowl resilvering, if your bowls are sound. Not the cheapest option.
The lens can be removed with a strong knife and some gentle prising.
I made these out of mini surrounds to allow a more common light to be used, a bit of a faff but uses original adjustment and no drilling. Works well and the black trim goes on as normal, but adds 120g per side
I kept pieces of the old bowl (30g) so i could try gluing them to some lightweight freeform wipacs at a later date. Anybody know the weight of these lamps please.
The lens can be removed with a strong knife and some gentle prising.
I made these out of mini surrounds to allow a more common light to be used, a bit of a faff but uses original adjustment and no drilling. Works well and the black trim goes on as normal, but adds 120g per side
I kept pieces of the old bowl (30g) so i could try gluing them to some lightweight freeform wipacs at a later date. Anybody know the weight of these lamps please.