Brake pedal adjustment

[Pete Boole]

No - it's a tandem system with each piston (in the master cylinder) feeding the front or rear.

Pete

[Alan_M]

You might get away bleeding just one front and one rear, but, personally I would do a full bleed as I don’t take chances with brakes and cost would only be about a tenner in fluid total and a little extra time. You’re then good for another 2 to 3 years.

[Tanz]

Forgot to update this:
Bled the whole system again. Went for a driive but the pedal was the same as before. I think the possibilty of makeing the brakes bind made me over compensate and I left too bigger gap between the 'push rod' and the master cylinder. So got to do it again
The next day I put it in for it's MOT and it passed with one advisory - 'Brake pedal travel slightly long'
At least the brakes work and I can use it.

[Tanz]

You can get special tools to measure the clearance.

Pete

Like this https://www.amazon.co.uk/NISHZHU-Brake- ... tdGY&psc=1

[Pete Boole]

Yep - that's the sort of thing I had in mind.

Pete

[Tanz]

I'm going to wait till the end of the month before buying and take out Amazon prime for a month. That way I will have accsess to all the footy over December