The current colour is just spare filament and will be done in black.
Bumper Overriders
Moderator: Board Moderators
-
Hawaiis0
- Senior Poster
- Posts: 4595
- Joined: Sun Jun 30, 2013 18:39
- Model: '86 SA; '89 SA '78 Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Bumper Overriders
I have got young lad working on 3D printing some overriders. They are coming along but need work on the radii.
The current colour is just spare filament and will be done in black.
The current colour is just spare filament and will be done in black.
Nothing is fool proof. Fools are clever!
-
Alan_M
- Senior Poster
- Posts: 1496
- Joined: Sat Aug 12, 2017 01:17
- Model: Excel SE, Excel SA, Elan SE
- Colour: Red, red, white
- Location: South Wales
Re: Bumper Overriders
Nice.
Is it just a shell that will need some foam or similar added to the inside as per the originals?
Is it just a shell that will need some foam or similar added to the inside as per the originals?
-
Hawaiis0
- Senior Poster
- Posts: 4595
- Joined: Sun Jun 30, 2013 18:39
- Model: '86 SA; '89 SA '78 Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Bumper Overriders
Yes just a shell with a lattice and 2 bosses to bolt into.
Nothing is fool proof. Fools are clever!
-
Hawaiis0
- Senior Poster
- Posts: 4595
- Joined: Sun Jun 30, 2013 18:39
- Model: '86 SA; '89 SA '78 Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Bumper Overriders
I didnt think they were available hence the play, however, they are on SJs for £60 each.
Nothing is fool proof. Fools are clever!
-
Zag
- Regular Poster
- Posts: 163
- Joined: Mon Aug 28, 2017 04:35
- Model: Excel SE
- Colour: Ice Blue
- Year: 1986
- Location: East Yorkshire
Re: Bumper Overriders
Easy thing to repair.
Mine were massively distorted and the mounting points were rusted out. Made a couple of mounting plates with protruding bolts then dug the old filler out from behind the overrider skin. Used builders expanding foam to fill the void and set the mounting points.
Trying to dig out the pre, during and post pics.
Mine were massively distorted and the mounting points were rusted out. Made a couple of mounting plates with protruding bolts then dug the old filler out from behind the overrider skin. Used builders expanding foam to fill the void and set the mounting points.
Trying to dig out the pre, during and post pics.