Tappet Shims 4 x 0.082", 1 x 0.119"

barker_001 · Post by **barker_001** » Thu Mar 13, 2014 12:10

Would anyone have these shims that they would be willing to sell / swap? Thanks...

jeff.fenton · Post by **jeff.fenton** » Thu Mar 13, 2014 16:31

Hello Bryan, I have a couple hundred shims including a 0.119, 2x0.082, and 2x0.0825 shims you can have, at £1 each, plus postage. They are in used condition, if they will do for you, let me have your address, I'll post them straight off. Cheers, Jeff.

barker_001 · Post by **barker_001** » Thu Mar 13, 2014 17:03

Hi Jeff, thanks for the offer. As luck would have it, a friend of a friend has just come up trumps with the right shims, so hopefully I'm sorted. From what many people have said on here though, setting the valve clearances often requires more than one attempt, so I may be looking for some more shims shortly...

Thanks again,

barker_001 · Post by **barker_001** » Sat Mar 15, 2014 19:52

A slight change of plan... Jeff, you have a pm!

jeff.fenton · Post by **jeff.fenton** » Sun Mar 16, 2014 10:34

Hello again Bryan, they're in the post, first class, you should get them on Tuesday. Jeff.

barker_001 · Post by **barker_001** » Sun Mar 16, 2014 16:36

Thank you Jeff, much appreciated!

The Lotus Grand Tourers

Tappet Shims 4 x 0.082", 1 x 0.119"

Tappet Shims 4 x 0.082", 1 x 0.119"

Re: Tappet Shims 4 x 0.082", 1 x 0.119"

Re: Tappet Shims 4 x 0.082", 1 x 0.119"

Re: Tappet Shims 4 x 0.082", 1 x 0.119"

Re: Tappet Shims 4 x 0.082", 1 x 0.119"

Re: Tappet Shims 4 x 0.082", 1 x 0.119"