Page 2 of 2
Posted: Tue Aug 14, 2007 16:14
by lambert.john
Many thanks, Steve.
Posted: Tue Aug 14, 2007 16:15
by amarshall
Scimitar apparently uses the same part - or replace with something a bit more reliable :
http://www.lotusexcel.net/phpbb/viewtopic.php?t=764
(search is a wonderful thing)
Posted: Wed Aug 15, 2007 10:27
by MG David
The push in otter switch is very simmilar and may be the same as the one used in late MGBs. They also tend to add cable ties to stop it popping out.
I agree with bridging the terminals on the otter as being the first test. You can further test the otter by using a cooker, a pan with some water in it, a jam thermometer and a multi meter. This will enable you to identify the water temp at which it switches the fans on and the slightly lower temp at which they switch off again.