Page 1 of 1
Various Parts Wanted
Posted: Wed Jun 26, 2013 21:45
by HC180
Re: 1991 Excel.
Two door beams, two electric cooling fans, AB14 ignition amplifier and a lower plastic spoiler that attaches beneath the two front bumper pieces.
All offers considered.
Re: Various Parts Wanted
Posted: Fri Jul 12, 2013 13:06
by crogw11597
Hi HC180
For the fans I would try your local scrap yard and use a pair of fiesta fans fit in the same brackets
I do have an ab14 available that was working before I changed my ignition to a more modern electronics if you still need it pm me or for info on what I have upgraded to.
Craig
Re: Various Parts Wanted
Posted: Mon Jul 15, 2013 10:18
by HC180
Will accept one brush and one magnet for the cooling fan ?
Re: Various Parts Wanted
Posted: Wed Sep 18, 2013 20:56
by alanbell
on your car the lower spoiler was rubber, I do not think that they are available now but if the body mountings are undamaged one can be made from rubber strip 75mm x6mm available from delta rubber who have a web site. cost about £50 which is a lot less than I paid lotus for the original item.
Re: Various Parts Wanted
Posted: Thu Sep 19, 2013 08:37
by shaunw
alanbell wrote:on your car the lower spoiler was rubber, I do not think that they are available now but if the body mountings are undamaged one can be made from rubber strip 75mm x6mm available from delta rubber who have a web site. cost about £50 which is a lot less than I paid lotus for the original item.
The Original rubber spoiler for later cars is available from SJ Sportscars for about £45.00. I fabricated my own metal supporting bracket from aluminium strip. Much cheaper than the original bracket and lighter too.
Regards
Shaun