Page 1 of 1
Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Thu Mar 13, 2014 12:10
by barker_001
Would anyone have these shims that they would be willing to sell / swap? Thanks...
Re: Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Thu Mar 13, 2014 16:31
by jeff.fenton
Hello Bryan, I have a couple hundred shims including a 0.119, 2x0.082, and 2x0.0825 shims you can have, at £1 each, plus postage. They are in used condition, if they will do for you, let me have your address, I'll post them straight off. Cheers, Jeff.
Re: Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Thu Mar 13, 2014 17:03
by barker_001
Hi Jeff, thanks for the offer. As luck would have it, a friend of a friend has just come up trumps with the right shims, so hopefully I'm sorted. From what many people have said on here though, setting the valve clearances often requires more than one attempt, so I may be looking for some more shims shortly...
Thanks again,
Re: Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Sat Mar 15, 2014 19:52
by barker_001
A slight change of plan... Jeff, you have a pm!

Re: Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Sun Mar 16, 2014 10:34
by jeff.fenton
Hello again Bryan, they're in the post, first class, you should get them on Tuesday. Jeff.
Re: Tappet Shims 4 x 0.082", 1 x 0.119"
Posted: Sun Mar 16, 2014 16:36
by barker_001
Thank you Jeff, much appreciated!
